top of page
SST25VF032B 4M x 8 SPI Flash Memory

The SST25VF032B 4M x 8 SPI flash memory breakout board is perfect for prototyping those projects that need extra memory that their microcontroller does not have. Use with a minimum of 6 connections.
Features are:

  • Single voltage read and write (2.7-3.6v))

  • SPI mode 0 and mode 3 compatible

  • High speed clock, up to 80MHz

  • Superior reliability; Endurance of 100,000 cycles, Data retention of 100 years

  • Low power; 10mA active, 5uA standby

  • Flexible erase capabilities; 4K, 32K, and 64K blocks

  • Fast erase and byte program; Chip erase 35mS, Sector/Block erase 18mS, Byte program 7uS

  • Auto Address Increment for faster write time

  • End of Write detection with Busy status on SO or polling Busy bit on status register

  • Hold pin; Suspends serial sequence to memory without deselecting the chip

  • Write protection; Enables/Disables lock-down protection of the status register

  • Software write protection; Write protection through block protection bits in the status register

  • Industrial temperature range (-40 to +85C)  

  • On board 10K pullups; #WP and #HOLD

Can't find what you need? Let us know how we can help with a custom solution or what you would like to see. Contact us.

Click the ebay link below

$5.95 CAD

Electronic Products

bottom of page